WZH-450 High Speed Cartoning Machine

450 Cartons per Minute, Four-Station Planetary Opening

Your line runs faster than your cartoner, and cartoning is where the shift backs up. The WZH-450 runs 450 cartons a minute. It handles blisters, tubes, pill trays, ALU strips and sachets on the same machine, with a carton range as wide as anything in our lineup.

1. Speed: 450 cartons per minute

2. Formats: blisters, tubes, pill trays, ALU strips, sachets

3. Carton: 70-180 × 35-80 × 14-50 mm, the full range

Is this the right machine for you?

✓ Yes, if…

✕ Buy something else if…

Four-Station Planetary Opening

The carton is drawn from the magazine and opened by a four-station double planetary rotation mechanism. A pre-forming device breaks the score lines twice while the carton is still moving, so it arrives at the chain fully square rather than half-open.

At 450 cartons a minute, a carton that opens 90% of the way is the single most common cause of a jam. This is the mechanism that prevents it.

Posterior Continuous Pushing

The pusher runs from behind and travels with the carton rather than waiting for it to stop. Nothing indexes, nothing hesitates, and there is no start-stop shock on the drive at high speed.

It also means the machine is easier to reach into. The pushing section sits at the back, so the operating side stays clear.

Leaflet Folding and Detection

The leaflet is folded, checked and fed into the carton alongside the product in the same push. If a leaflet is missing, the carton is rejected rather than passed on.

Separated Drive Zone

The drive components sit behind the working area rather than beneath it. Dust does not collect where you clean, and line clearance between products is faster.

Technical specification

ParameterValue
ModelWZH-450
Encasing Speed450 cartons/min
Carton Size Range (L x W x H)70–180 × 35–80 × 14–50 mm
Leaflet Material Quality60–70 g/m²
Unfolded Leaflet Size (L x W)80–300 × 90–180 mm
Working Air Pressure0.6 MPa
Air Consumption220–240 L/min
Power SupplyThree-phase, 60 Hz. Built to your U.S. supply; we confirm the voltage with your quote
Main Motor Power5 kW
Machine Weight5,500 kg
Dimensions4,789 × 1,800 × 2,008 mm

Model comparison

Model

Speed

What it packs

Carton L×W×H (mm)

Leaflet unfolded

Power

WZH-120-III

30–120

Blister packs

70-180 × 35-85 × 14-50

80-250 × 90-180

Single-phase, 1.5 kW

WZH-120P

30–120

Bottles, with infeed unscrambling

70-180 × 35-85 × 14-50

80-250 × 90-180

Single-phase, 1.5 kW

WZH-120D

30–120

Sachets and pouches, 1–12 per carton

70-180 × 35-85 × 14-50

80-250 × 90-180

Three-phase, 4 kW

WZH-180

180

Blisters, tubes, trays, bottles, sachets

70-165 × 35-85 × 14-50

80-300 × 90-180

Three-phase, 4.5 kW

WZH-260

260

Blisters, tubes, trays, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-260P

260

Bottles, with infeed unscrambling

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-320

320

Blisters, bottles, tubes, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5.8 kW

WZH-450

450

Blisters, tubes, trays, sachets

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 5 kW

WZH-600

600

Blisters, bottles, sachets · full servo

70-180 × 35-80 × 14-50

80-300 × 90-180

Three-phase, 15 kW

Two things decide the model, and speed is only the second one.

What you pack comes first. Blisters, bottles and sachets each need a different feeder at the infeed. In the 120 series that is three separate machines. Above 120 the machines are more general, except the 260P, which is built for bottles.

Carton size is almost the same across the range. Every model takes a carton 70 to 180 mm long, except the WZH-180, which stops at 165 mm. Only the width narrows slightly above 180 cartons a minute, from 85 to 80 mm. So you do not lose carton flexibility by buying speed.

Industry Applications

Supplement Blister Lines

Downstream of a high-speed or dual-lane blister machine, two or three plates to a carton with a leaflet.

Tubes and Pill Trays

Ointment tubes, pill trays and soft ALU strips on the same machine, with a change of feeder.

Sachets and Stick Packs

Single-serve supplement sachets and stick packs into retail cartons.

Changeover

Throughput sells machines. Changeover decides what you actually produce in a week.

What changed

What you adjust

Roughly

Same carton, new batch

Recipe on the screen

A few minutes

Carton length or width

Handwheels only — no parts to change

15–30 minutes

Carton or product height

The pusher head and pusher block must be swapped

15–30 minutes

Product format changes

The feeder at the infeed

15–30 minutes

Closing style (tuck-in → glue)

Not a changeover. That is a rebuild

—

Length and width are a handwheel. Height means changing the pusher. A different product means a different feeder. A different closing style means a different machine.

What to check before you buy

01

The five questions any supplier should ask you

What goes in the carton and how many. Carton dimensions and closing style. Leaflet format and whether it arrives folded. What feeds the machine upstream. Target speed. If a supplier quotes you without these, the machine that arrives will not fit the line it was bought for.

02

Carton sizing — where most projects go wrong

Manually packed cartons are usually a snug fit around the product. An automated pusher needs clearance. Send us both your product and carton dimensions. We will tell you before you order whether your existing carton runs, or needs modifying — rather than after it has been printed in quantity.

03

The documentation

Operating and maintenance manuals in English, electrical schematics, a spare parts list with part numbers and prices, and a signed FAT report before the machine ships. Ask any supplier to show you a sample manual page before you order.

Why Choose AIPAK?

One Point of Contact

You deal with us for the machine, the installation and the service call. Custom feeders, closing configurations and layout changes go through the engineers who build it.

Your Carton Checked Before You Order

Send us your carton and product dimensions. We tell you before you order whether your carton runs as it is or needs changing, not after it has been printed in quantity.

A U.S. Number, Answered by Us

+1 (213) 526-8644, answered by our engineers 9 AM–7 PM China time, Monday to Friday. That’s evening and overnight in the U.S., so leave a message or send a WhatsApp anytime and we’ll pick it up first thing.

Spare Parts and Lead Time, in Writing

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

WZH-450 Cartoning Machine FAQ

How does the WZH-450 open cartons at 450 a minute?

A four-station double planetary mechanism opens the carton outward and pre-forms it twice while it keeps moving, so the score lines break and the carton arrives square. At this speed, a carton that only half opens is the most common cause of a jam.

How is the leaflet kept in place at this speed?

The leaflet folder is linked to the main drive. Holding fingers clamp the folded leaflet, and the pusher slides it into the carton together with the product while both are moving.

Can it put several blister plates in one carton?

Yes. You set the plate count on the touchscreen, for example 2, 3 or 4 plates per carton.

What happens if the machine jams?

Overload protection stops the machine, sounds an alarm and shows on the touchscreen where the fault is, so the operator goes straight to it.

Does it run on US power?

Yes. We build to your U.S. supply at 60 Hz and confirm the voltage with your quote.

How do spare parts work?

A kit of wear parts ships with your machine. Every part in the kit, and the lead time for anything outside it, is listed in your quote in writing.

Customers Also Interested In...

Send us your carton and your product

Carton dimensions and product dimensions together decide the machine. Send both and we will come back with a configuration, a layout drawing and a price. If a cartoner is not what you need yet, we will tell you that instead.

  • Direct from our factory

  • Lead time confirmed in your quote

  • Installation and training available

  • Spare parts listed in your quote

Scroll to Top